Call Us Now
HP DesignJet Z3200 Repair Los Angeles
HP DesignJet Z3200 Repair & Service Los Angeles | Orange County | San Bernardino County | Riverside County
HP DesignJet Z3200 Plotter Service & Maintenance
- Clean HP DesignJet Plotter Carriage Rails.
- Lubricate the HP Design-Jet Plotter Carriage Rails.
- Cleaning the HP DesignJet Drive Roller
- DesignJet Encoder Strip Cleaning and inspection.
- Inspect and Clean the HP plotter Platen Assembly.
- Clean the entire HP Design Jet plotter/printer.
- Calibrate the HP plotter print head after replacing the belt.
- Calibrate the Color after the plotter service is performed.
- HP DesignJet plotter quality test printout.
HP DesignJet Z3200 Common Replacement Parts
- Replace broken belts
- Ink tubing system
- Purge the ink tubing system
- Carriage Assembly
- Trailing cable
- Replace service station.
Error code | Recommendation |
52:01 | The printer needs internal cleaning. See Clean the printhead drop detector. |
61:01 | The file format is wrong and the printer cannot process the job. The printer expects jobs to be sent in PCL3 format. |
62, 63, 64, 65, 67 | Check that the printer cables are well connected and the USB cable is of good quality. Try again to print the same file. Make sure you are using the correct driver for your printer. |
74.1 | Try the firmware update again. If possible, try to update over a network if the USB update failed. Do not try to use your computer while the update is in progress. |
75 | A printer maintenance kit is required. |
78 | You may be trying to print borderless on a paper type that does not support it. See Print with no margins. |
79 | Restart the printer. If the problem persists, update your printer’s firmware. |
81, 86, 87 | There may be a paper jam. See The paper has jammed. |
94, 94.1 | Restart color calibration. |
98 | There may be a printhead problem. |